Home > Vans > RV-10 Kitplane >

RV-10 Clear Wing tip lenses (pair)
RV-10 Clear Wing tip lenses (pair)

List Price: $145.00
Our Price: $132.25
You save $12.75!

Availability:: Usually Ships in 3 to 5 Days
Product Code: RV10 WING TIPS (PAIR)


Tint Color*:
Aircraft Information




Serial Number*:

Tail Number*:

Description Technical Specs
P/N: RV10 Wing tip (pair)
OEM P/N: RV10 Wing tip (pair)

Description: Clear Wing tip lenses (pair)

Thickness: .080

Cee Bailey's design makes it easy for a professional installation every time. Cee Bailey's lens covers are specified for the left and right sides which will require minimal trimming. The radius and contours is manufactured spot on to match the original wing. The original bathtub looking design must first be cut in half and will require several adjustments. With our design just mark it, trim it and your good to go. Always inspect the frame prior to trimming for possible build up, then clean and sand as needed. The original lens is made from PETG plastics similar to most water bottles.

For builders who have already fit the lenses to their wingtips, get the undrilled. Just mark lens to your existing attachment holes, drill and install. (there may be some slight sanding needed on the lens or wingtip joggle, as we have experienced some wingtips with gel coat buildup in the joggle that must be removed for a true, flush fit. For the builder who has not yet installed the lens, get the drilled version. These are predrilled, de-burred and 100 degree countersunk, ready to be installed. Just fit the lenses, mark the drilling point on the wingtip through the lens, drill the wingtip and install your attaching hardware to the wing tip.

Manufactured from .080 aircraft grade PETG and only available in clear.

Share your knowledge of this product with other customers... Be the first to write a review